Search
Filters
Conversion kits for Older Fanatec wheels
Availability: 15 in stock
Manufacturer: Sim Racing Machines
£82.50

This conversion kit uses the same electronics as the other 5x kit but has a case that allows fitting to the older Fanatec wheels.  If your Fanatec wheel has the older style QR with a round back and the bolts that come through the wheel and into the QR, then this is the kit you need.

Included in your kit are...

  • The conversion kit with coiled USB cable fitted
  • Spare Coiled USB cable (while stocks last)
  • Wheel cable adapter for 12 pin JST PH wheels
  • Wheel cable adapter for 8 pin JST PH wheels
  • Bag of bolts

Fanatec Formula wheels

This kit will work on these Formula wheels

  • Formula Black.
  • Formula Carbon.
  • Formula E-Sport V1 (Not V2) V1 does not have LED's at the side of the display.

Fanatec BMW GT2 wheel V1 (NOT V2)

This wheel is fully supported and out kit will allow full functioallty including the display and rumble.

Porsche 918 RSR wheel

This wheel is fully supported and our kit will allow full functionallity including LED's, display and rumble.

Universal Hub (NOT V2)

The universal hub is fully supported.  All buttons, shifters and the Display will work.  You can also use the Podium Advanced Paddle Module and all 4 shifters will work together with the clutch paddles.  You will have 2 seperate clutches, or hand controls but no bite point functionallity.

I recomend adding the Formula Spacer 6 hole 16mm spacer as this will allow removal of the display, otherwise it will be stuck in position after the conversion.

Fitting your wheel to a wheel base

Our conversion kits come with mounting holes for most mounting solutions.

  •  6 x M5 threaded holes on 70mm PCD
  •  3 x M5 threaded holes on 50.8mm PCD
  •  3 x M5 threaded holes on 52.0mm PCD (Fanatec specific)

You can bolt the kit directly onto a wheel base plate.  If bolting direct we recomend using out 40mm spacer so that applying the bolts is easier.

All popluar quick release systems can be bolted to the conversion kit.  Please remember that 2 threaded holes cannot be bolted together.  You require one side to be threaded and the other must allow the M5 bolt to pass through.  It is very easy to drill out a threaded hole with a 5mm drill bit if needed.  We recomend that you drill the threads from the QR rather than the conversion kit where possible.

A few quick release system must be bolted from the wheel side.  For example the AccuForce QR. When you select these QR types from the options we will include our additional mounting solution system which is why there is an increased price.  this allows the QR to be fitted from the back of the wheel making it much easier.

We stock most QR systems and spacers which can be ordered with the conversion kit.

HELP

If you are in any doubt about which options to select or just want some advice, please make contact using the contact form or via direct email to sales@simracingmachines.com

This conversion kit uses the same electronics as the other 5x kit but has a case that allows fitting to the older Fanatec wheels.  If your Fanatec wheel has the older style QR with a round back and the bolts that come through the wheel and into the QR, then this is the kit you need.

Included in your kit are...

  • The conversion kit with coiled USB cable fitted
  • Spare Coiled USB cable (while stocks last)
  • Wheel cable adapter for 12 pin JST PH wheels
  • Wheel cable adapter for 8 pin JST PH wheels
  • Bag of bolts

Fanatec Formula wheels

This kit will work on these Formula wheels

  • Formula Black.
  • Formula Carbon.
  • Formula E-Sport V1 (Not V2) V1 does not have LED's at the side of the display.

Fanatec BMW GT2 wheel V1 (NOT V2)

This wheel is fully supported and out kit will allow full functioallty including the display and rumble.

Porsche 918 RSR wheel

This wheel is fully supported and our kit will allow full functionallity including LED's, display and rumble.

Universal Hub (NOT V2)

The universal hub is fully supported.  All buttons, shifters and the Display will work.  You can also use the Podium Advanced Paddle Module and all 4 shifters will work together with the clutch paddles.  You will have 2 seperate clutches, or hand controls but no bite point functionallity.

I recomend adding the Formula Spacer 6 hole 16mm spacer as this will allow removal of the display, otherwise it will be stuck in position after the conversion.

Fitting your wheel to a wheel base

Our conversion kits come with mounting holes for most mounting solutions.

  •  6 x M5 threaded holes on 70mm PCD
  •  3 x M5 threaded holes on 50.8mm PCD
  •  3 x M5 threaded holes on 52.0mm PCD (Fanatec specific)

You can bolt the kit directly onto a wheel base plate.  If bolting direct we recomend using out 40mm spacer so that applying the bolts is easier.

All popluar quick release systems can be bolted to the conversion kit.  Please remember that 2 threaded holes cannot be bolted together.  You require one side to be threaded and the other must allow the M5 bolt to pass through.  It is very easy to drill out a threaded hole with a 5mm drill bit if needed.  We recomend that you drill the threads from the QR rather than the conversion kit where possible.

A few quick release system must be bolted from the wheel side.  For example the AccuForce QR. When you select these QR types from the options we will include our additional mounting solution system which is why there is an increased price.  this allows the QR to be fitted from the back of the wheel making it much easier.

We stock most QR systems and spacers which can be ordered with the conversion kit.

HELP

If you are in any doubt about which options to select or just want some advice, please make contact using the contact form or via direct email to sales@simracingmachines.com

Customers who bought this item also bought

Male pin part for Fanatec wheel side

£19.50

Conversion Kit Plug and Play 6x (Current Fanatec Wheels)

£109.50