Button and shifter plate

Manufacturer: Sim Racing Machines

Select the product colour


These products are designed to complement our Fanatec wheel Emulator but can be used as basic button boxes for any wheel if you add a USB controller.

We have developed these in 2 sizes.  The standard is perfect for a 26 to 30cm diameter wheel while the wider version is for an Oval style 34cm diameter wheel.

We cannot guarantee perfect fitment with your wheel, but everything we have tried them on seem to work well.

The product comes as a package comprising...

  • Wheel plate machined from 3mm thick carbon fibre sheet with a matt finish.
  • 2 x basic dome buttons - Button colour will vary depending on stock
  • 1 x Hat switch with up, down, left, right and push functions.  You can wire and encoder if wanted but not for the Emulator.
  • Our own Aluminium hat switch knob in Black or dark red - Flat top that can have a sticker attached.
  • Our own 19mm Aluminium spacer with mounting holes for 70 and 50mm wheels
  • Our own 3mm thick Aluminium spacer to allow the wheel to clear button and shifter bolt heads.
  • Ready to attach our shifters with 6 mounting holes on each side.


  • Button holes are 12mm Diameter
  • Shifter mount holes are 3mm diamters and 10mm apart.

Standard plate...

  • Width: 150mm
  • Width including our shifter with GT1 Paddles: 250mm
  • Height: 85mm
  • Mounting holes: 6 x 5mm on 70mm PCD plus 6 x 5mm on 50.8mm PCD
  • 2 Buttons on left
  • 1 Hat Switch on right

Wide plate...

  • Width: 200mm
  • Width including our shifter with GT1 Paddles: 300mm
  • Height: 85mm
  • Mounting holes: 6 x 5mm on 70mm PCD
  • Centre hole 55mm diameter
  • 2 Buttons on left
  • 1 Hat Switch on right

Deep Dish Oval Wheels...

We are just finalising an angled mounting adapter for the standard wheel plate that will allow you to move the shifters out by 27 to 35mm on each side and closer to the wheel rim.  This enables using the shifters with a deep dish wheel where normally the shifters are too far away.

The adapter consists of a 10 degree angled 3D printed spacer and a carbon fibre arm extension.

Special requests.

We can adjust the button plates a little if needed.  For example if you need the centre hole on the standard plate to allow a horn push to be attached to the wheel.

Customers who bought this item also bought

Snap action gear shifters (Pair)

Generic great quality snap action pair of shifters

Replacement Gear Shifter Set for Fanatec Wheels

Replacement gear shifter set for the Fanatec Formula Wheel Rim. Carbon Fibre and with a snap action. Easy to fit. One of the best upgrades you can buy for this wheel.

Porsche 918 Carbon Fibre Paddles

Replacement paddles for the Fanatec Porsche 918 wheel in carbon Fibre

Formula shifter paddle set

Pair of shifter paddles for our Snap action shifters.